[ltp] Netgear FA511 trouble

[Vo^ Danh]

On 5/24/05, Jacob Klitm=F8ller <jacobk@stofanet.dk> wrote:
> Hi
>=20
> Having searched the net in vain I turn to this forum for help.
>=20
> Problem: I am using gentoo (kernel 2.4.28) on a Thinkpad 600 quite
> happily - with a working Netgear FA511 10/100 netcard. I am unsuccesfull
> when trying to use any 2.6.x kernel in which case the netcard stops
> working - though the card gets detected after ejecting it and
> reinserting it (as showed by lspci and lshw)
>=20
> lsmod (kernel 2.4.28 (no pcmcia-support in the kernel) + latest pcmcia-cs=
):
> tulip_cb; cb_enabler; ds; i82365; pcmcia_core
>=20
> lsmod (kernel 2.6.11 (all pcmcia-support enabled) + lates pcmcia-cs):
> tulip; pcmcia yenta_socket rsrc_nonstatic; pcmcia_core
>=20
> lshw is identical between the two kernels but for one thing: where in
> kernel 2.4.28 the netcard displays same IRQ as the cardbus bidge (IRQ
> 11) this is not the case for kernel 2.6.11 where the bridge has IRQ 9
> while the card displays no IRQ.
>=20
> Attempting to load i82365 in kernel 2.6.11 get me a: FATAL: Error
> inserting i82365
> (/lib/modules/2.6.11-gentoo-r9/kernel/drivers/pcmcia/i82365.ko): No such
> device.
I think that you've used a pre-built kernel, so it has no module for
i82365. So U must rebuild your kernel to include this module or
include it into kernel.

May it helps your net card to work.

--=20
sOs : say open source.