[ltp] Modem in R50e

[????????? ?.?]

And modem send in line dialtone?

> 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
> AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
>         Subsystem: IBM: Unknown device 0559
>         Flags: bus master, medium devsel, latency 0, IRQ 11
>         I/O ports at 2400 [size=256]
>         I/O ports at 2000 [size=128]
>         Capabilities: [50] Power Management version 2

me too.

Say me pls. How you configure and compile sldaemon, modules, your
distribution( Debian?)




----- Original Message -----
From: "Pirity Tamas Gabor" <ptg@apaczai.elte.hu>
To: <linux-thinkpad@linux-thinkpad.org>
Sent: Tuesday, February 21, 2006 2:28 PM
Subject: Re: [ltp] Modem in R50e


> Ha jól hiszem, Didrik Pinte írta az alábbiakat:
> > > did@geru-itae:~$ lspci -v
> > >  ...
> > >
> > > 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM
> > > (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00
> > > [Generic])
> > >         Subsystem: IBM: Unknown device 0525
> > >         Flags: bus master, medium devsel, latency 0, IRQ 11
> > >         I/O ports at 2400 [size=256]
> > >         I/O ports at 2000 [size=128]
> > >         Capabilities: <available only to root>
> >
>  ...
> > geru-itae:/home/did# /etc/init.d/sl-modem-daemon start
> > Starting SmartLink Modem driver for: modem:1.
> > Creating /dev/modem symlink, pointing to: /dev/ttySL0.
>
>
> 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
> AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
>         Subsystem: IBM: Unknown device 0559
>         Flags: bus master, medium devsel, latency 0, IRQ 11
>         I/O ports at 2400 [size=256]
>         I/O ports at 2000 [size=128]
>         Capabilities: [50] Power Management version 2
>
> For me device number 0559 and not 0525, maybe that is why your
> modem works and mine not.
>
> # /etc/init.d/sl-modem-daemon restart
> Shutting down SmartLink Modem driver normally.
> Unloading modem driver from kernel ... ACPI: PCI interrupt for device
0000:00:1f.6 disabled
> snd_intel8x0m.
> ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
> MC'97 1 converters and GPIO not ready (0xff00)
> Starting SmartLink Modem driver for: modem:1.
> Creating /dev/modem symlink, pointing to: /dev/ttySL0.
>
> That looks very nice, and if i run minicom, modem answers fine ,,ATZ''
> like commands. Everything works...except ATD. :((
>
>
> --
> PTG
> Your love life will be happy and harmonious.
> Debian 3.0 -- Linux 2.6.14.3
> --
> The linux-thinkpad mailing list home page is at:
> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
>