[ltp] Re: X60s w/t kern 2.6.19-rc1-git: two BUG warnings

[Martin Lorenz]

On Wed, Oct 11, 2006 at 09:06:50AM +0200, Dipl.-Ing. Martin Lorenz wrote:
> On Tue, Oct 10, 2006 at 05:18:27PM -0600, Eric W. Biederman wrote:
> > Jeremy Fitzhardinge <jeremy@goop.org> writes:
> > 
> > > Martin Lorenz wrote:
> > >> Dear kernel gurus,
> > >>
> > >
> > > (CC:s added to various interested parties.)
> > >
> > >> whatever I do and whic problem I seem to get fixed new ones arise:
> > >>
> > >> now I loose ACPI events after suspend/resume. not every time, but roughly 3
> > >> out of 4 times.
> > >>
> > >
> > > Yes, I'm seeing this as well.  It used to be a 100% failure, so there has been
> > > some improvement.  On the other hand, before that it used to work perfectly...
> > > Unfortunately I don't have a good feeling for when these changes happened.
> > 
> > So the first symptom is not the failure in e1000 open but this.
> > [ 6727.082000] Trying to free already-free IRQ 20
> > Which I suspect comes from e1000_close as it happens after
> > the e1000 watchdog timer goes off because it hasn't gotten
> > interrupts for a while.
> > 
> > We have other bits of suspicious code as well.
> > The e1000 rolls it's own version of pci_save_state but doesn't
> > call any of the msi save/restore state routines.
> > 
> > The bug is from the attempt to allocate an already allocated irq.
> > So it appears somehow in the save/restore mess the msi code
> > thought the irq code was allocates but the irq code did not?
> > 
> 
> this morning I tried and booted the machine with pci=nomsi
> the BUG does not come up as expected but the symptom of loosing ACPI after
> suspend/resume remains...
> 
I have to say sorry for insisting on the ACPI issue
after digging a little deeper I found that it must come from somewhere in
the ibm_acpi code and maybe even in a helper script. I still have to seek
for that one and read the ibm_acpi patches and discussion that go on for
over a week now in ltp...

maybe soneone can quickly tell me, what it is trying to point out with this
messages from the suspend or resume code:

Calling INT 0x15 (F000:5E81)
 EAX is 0x10005F00
Calling INT 0x15 (F000:5E81)
 EAX is 0x10005F40
Calling INT 0x15 (F000:5E81)
 EAX is 0x5F34
Calling INT 0x15 (F000:5E81)
 EAX is 0x5F35

my current workaround is to send a reset to /proc/acpi/ibm/hotkey
as last command on resume

> I put up some information on my current configuration on
> http://www.lorenz.eu.org/~mlo/kernel/
> tell me, what I should add to help 
> 
I will add dumps of /proc/acpi/ibm/* before and after resume shortly

> BTW: can someone tell me, why I can't pull from
>      git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>      anymore?
>      I keep getting 'fatal: unable to connect a socket (Connection refused)'
>      since yesterday afternoon (first noticed ~2pm UTC)

I would love to pull the latest git, but still can't...

> 
> > I have scratched the msi code enough lately that something may have
> > shaken loose.   In particular in commit: 
> > d7bd007e480672c99d8656c7b7b12ef0549432c37 I explicitly disallowed some
> > weird double allocation/deallocation code that could have masked this
> > problem.  

the msi BUG warning remains untouched

> > 
> > The e1000 watchdog doesn't seem to be going off in the functioning
> > case so that may not be it.
> > 
> > My problem is I have been given two incomplete dmesg traces one
> > that works and one that doesn't and without any background in this
> > area beyond noting the e1000 watchdog timer is firing I can't say what
> > happened.
> > 
> > In the working cases do you have trouble if you up and down the
> > network interface?
> > 
> > We seem to be at that nasty interface layer where every piece is
> > making assumptions about how someone else's piece works, and someone
> > has their assumptions wrong.
> > 
> > If someone who understands the how suspend/resume is supposed to work
> > for these kinds of things can speak up that would help.
> > 
> > >
> > >> the only errornous things I see in the logs are those:
> > >>
> > >> [ 6727.089000] BUG: warning at drivers/pci/msi.c:680/pci_enable_msi()
> > >> [ 6727.089000]  [<c0103bd9>] dump_trace+0x69/0x1af
> > >> [ 6727.089000]  [<c0103d37>] show_trace_log_lvl+0x18/0x2c
> > >> [ 6727.089000]  [<c01043d6>] show_trace+0xf/0x11
> > >> [ 6727.089000]  [<c01044d9>] dump_stack+0x15/0x17
> > >> [ 6727.089000]  [<c0208cd6>] pci_enable_msi+0x78/0x22e
> > >> [ 6727.090000]  [<c0257fe5>] e1000_open+0x64/0x176
> > >> [ 6727.091000]  [<c029b121>] dev_open+0x2b/0x62
> > >> [ 6727.092000]  [<c0299c2f>] dev_change_flags+0x47/0xe4
> > >> [ 6727.093000]  [<c02cdceb>] devinet_ioctl+0x252/0x556
> > >> [ 6727.094000]  [<c0290e9a>] sock_ioctl+0x19e/0x1c2
> > >> [ 6727.095000]  [<c016979b>] do_ioctl+0x1f/0x62
> > >> [ 6727.095000]  [<c0169a23>] vfs_ioctl+0x245/0x257
> > >> [ 6727.096000]  [<c0169a81>] sys_ioctl+0x4c/0x67
> > >> [ 6727.096000]  [<c0102dc3>] syscall_call+0x7/0xb
> > >> [ 6727.096000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
> > >> [ 6727.096000]
> > >> [ 6727.096000] Leftover inexact backtrace:
> > >> [ 6727.096000]
> > >> [ 6727.096000]  [<c02e007b>] unix_stream_connect+0x15b/0x367
> > >> [ 6727.096000]  =======================
> > >>
> > >> which occurs in variations but very often
> > >>
> > >
> > > This just seems to be something thinking the IRQ isn't MSI-capable.  It doesn't
> > > seem to have any negative effect - the e1000 works fine anyway.
> > 
> > It is a BUG.  The first symptoms of which where the failure to free
> > the irq in by the e1000 watchdog.  The normal irq code said you didn't
> > have an irq handler registered for that irq.  
> > 
> > Does anyone know how the irq handler could go aways in the weird
> > suspend/resume world?
> > 
> > >> [ 6708.389000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full
> > > Duplex
> > >> [ 6708.389000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
> > >> [ 6727.082000] Trying to free already-free IRQ 20
> > >> [ 6727.089000] BUG: warning at drivers/pci/msi.c:680/pci_enable_msi()
> > >> [ 6727.089000]  [<c0103bd9>] dump_trace+0x69/0x1af
> > >> [ 6727.089000]  [<c0103d37>] show_trace_log_lvl+0x18/0x2c
> > >> [ 6727.089000]  [<c01043d6>] show_trace+0xf/0x11
> > >> [ 6727.089000]  [<c01044d9>] dump_stack+0x15/0x17
> > >> [ 6727.089000]  [<c0208cd6>] pci_enable_msi+0x78/0x22e
> > >> [ 6727.090000]  [<c0257fe5>] e1000_open+0x64/0x176
> > >> [ 6727.091000]  [<c029b121>] dev_open+0x2b/0x62
> > >> [ 6727.092000]  [<c0299c2f>] dev_change_flags+0x47/0xe4
> > >> [ 6727.093000]  [<c02cdceb>] devinet_ioctl+0x252/0x556
> > >> [ 6727.094000]  [<c0290e9a>] sock_ioctl+0x19e/0x1c2
> > >> [ 6727.095000]  [<c016979b>] do_ioctl+0x1f/0x62
> > >> [ 6727.095000]  [<c0169a23>] vfs_ioctl+0x245/0x257
> > >> [ 6727.096000]  [<c0169a81>] sys_ioctl+0x4c/0x67
> > >> [ 6727.096000]  [<c0102dc3>] syscall_call+0x7/0xb
> > >> [ 6727.096000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
> > >> [ 6727.096000] [ 6727.096000] Leftover inexact backtrace:
> > >> [ 6727.096000] [ 6727.096000]  [<c02e007b>] unix_stream_connect+0x15b/0x367
> > >> [ 6727.096000]  =======================
> > >> [ 6728.719000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full
> > > Duplex
> > >> [ 6728.719000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling
> > >TSO
> > 
> > Eric
gruss
  mlo
--
Dipl.-Ing. Martin Lorenz

            They that can give up essential liberty 
	    to obtain a little temporary safety 
	    deserve neither liberty nor safety.
                                   Benjamin Franklin

please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D

ICQ UIN: 33588107