[ltp] T400s BT not working properly

[palim palim]

Hi everyone,

my new TP T400s (2808 D5G) has got a BT-PCI-Card:
$ lsusb|grep Blue
Bus 004 Device 006: ID 0a5c:2145 Broadcom Corp. Bluetooth with Enhanced Dat=
a=20
Rate II

With Debian Squeeze files can be sent to my mobile phone, but not vice vers=
a.
# hciconfig hci0
hci0: =A0 Type: USB
=A0 =A0 =A0 =A0 BD Address: 00:24:2C:C1:32:C1 ACL MTU: 1021:8 SCO MTU: 64:1
=A0 =A0 =A0 =A0 UP RUNNING PSCAN
=A0 =A0 =A0 =A0 RX bytes:43223 acl:1190 sco:0 events:3020 errors:0
=A0 =A0 =A0 =A0 TX bytes:1255118 acl:5829 sco:0 commands:82 errors:0

=A0In fact, the TP cannot be detected unless I do a
# hciconfig hci0 piscan
This will make the BT visible.
Though iscan is enabled:
$ cat /etc/bluetooth/hcid.conf|sed '/#/d'|sed '/^$/d'
options {
=A0 =A0 =A0 =A0 autoinit yes;
=A0 =A0 =A0 =A0 security user;
=A0 =A0 =A0 =A0 pairing multi;
=A0 =A0 =A0 =A0 passkey "1234";
}
device {
=A0 =A0 =A0 =A0 name "%h-%d";
=A0 =A0 =A0 =A0 class 0x100100;
=A0 =A0 =A0 =A0 pscan enable; iscan enable;
=A0 =A0 =A0 =A0 lm accept;
=A0 =A0 =A0 =A0 lp rswitch,hold,sniff,park;
}
, the iscan-option has to be set manually.
question no.1: how do I set the iscan-option automatically, as the hcid.con=
f=20
seems to be ignored.
question no.2: how to manage pairing, which does not work initiated from th=
e=20
phone.
thanks!
p. alim=0A=0A________________________________________________________<br>M=
=E1r 12 =E9ve els=F5 a gyermekment=E9sben!<br>Adja SZJA 1%-=E1t a Szent M=
=E1rton Gyermekment=F5 Szolg=E1latnak, hogy elindulhasson egy =FAjabb gyerm=
ek-ment=F5orvosi kocsi!<br>http://ad.adverticum.net/b/cl,1,6022,379599,4685=
95/click.prm