[ltp] OT - Linux Thinkcentre...
zed
linux-thinkpad@linux-thinkpad.org
Tue, 20 Jul 2010 22:00:00 +1200
zed <zed@zed.net.nz> wrote:
> "Chris. Aubrey-Smith" <cas194@gmail.com> wrote:
>
> > On 18 July 2010 00:53, John Jason Jordan <johnxj@comcast.net> wrote:
> >
> > > On Sun, 18 Jul 2010 07:04:36 +1200 zed <zed@zed.net.nz> dijo:
> > >
> > > > Is there anyone on the list who can point me to a similar list for
> > > > users of the IBM Thinkcentre, please. I have searched Google without
> > > > success.
> > > >
> > > > I have an elderly friend using one of these machines and I've just
> > > > installed LinuxMint for her. She was using WindowsXP and the
> > > > machine was taking nigh on 4 minutes to boot. Mint was installed in
> > > > the hope that this would cure the problem. Alas! it is still a four
> > > > minute boot time.
[snip]
> >
> > What does dmesg tell you?
> >
> As soon as I get to the computer again - it is about 2-3 km away, I'll do
> a dmesg and report back the result.
I have visited my friend with the IBM ThinkCentre and carried out some
research. The actual details of the machine are:
Deciphering the result of the dmesg command, which is given below, is beyond
my level of competence, so I seek your assistance to point out any errors
which could lead to a slow boot time. As a matter of interest, the machine
is a 2.53GHz, not a 1.7 GHz as I reported.
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 257820
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic
root=UUID=3a0d10d4-bc64-4a6e-8938-f6517ae8ef24 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5199040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f770)
[ 0.000000] Memory: 1003384k/1039808k available (4673k kernel code,
35544k reserved, 2122k data, 656k init, 130504k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.959 MHz processor.
[ 0.008007] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5053.91 BogoMIPS (lpj=10107836)
[ 0.008037] Security Framework initialized
[ 0.008071] AppArmor: AppArmor initialized
[ 0.008083] Mount-cache hash table entries: 512
[ 0.008278] Initializing cgroup subsys ns
[ 0.008287] Initializing cgroup subsys cpuacct
[ 0.008294] Initializing cgroup subsys memory
[ 0.008308] Initializing cgroup subsys devices
[ 0.008312] Initializing cgroup subsys freezer
[ 0.008316] Initializing cgroup subsys net_cls
[ 0.008357] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.008362] CPU: L2 cache: 256K
[ 0.008366] CPU: Hyper-Threading is disabled
[ 0.008373] mce: CPU supports 4 MCE banks
[ 0.008391] CPU0: Thermal monitoring enabled (TM1)
[ 0.008399] using mwait in idle threads.
[ 0.008411] Performance Events: no PMU driver, software events only.
[ 0.008422] Checking 'hlt' instruction... OK.
[ 0.025343] SMP alternatives: switching to UP code
[ 0.040248] Freeing SMP alternatives: 19k freed
[ 0.040273] ACPI: Core revision 20090903
[ 0.052229] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.052238] ftrace: allocating 21771 entries in 43 pages
[ 0.056134] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.056444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.096494] CPU0: Intel(R) Celeron(R) CPU 2.53GHz stepping 03
[ 0.100001] Brought up 1 CPUs
[ 0.100001] Total of 1 processors activated (5053.91 BogoMIPS).
[ 0.100001] CPU0 attaching NULL sched-domain.
[ 0.100001] devtmpfs: initialized
[ 0.100001] regulator: core version 0.5
[ 0.100001] Time: 19:23:11 Date: 07/20/10
[ 0.100001] NET: Registered protocol family 16
[ 0.100001] EISA bus registered
[ 0.100001] ACPI: bus type pci registered
[ 0.100001] PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3
[ 0.100001] PCI: Using configuration type 1 for base access
[ 0.100001] bio: create slab <bio-0> at 0
[ 0.100590] ACPI: EC: Look up EC in DSDT
[ 0.121950] ACPI: Interpreter enabled
[ 0.121960] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.121997] ACPI: Using IOAPIC for interrupt routing
[ 0.157079] ACPI: No dock devices found.
[ 0.158765] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.158843] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.158858] pci 0000:00:00.0: reg 10 32bit mmio pref:
[0xec000000-0xefffffff]
[ 0.158947] pci 0000:00:02.0: reg 10 32bit mmio pref:
[0xf0000000-0xf7ffffff]
[ 0.158958] pci 0000:00:02.0: reg 14 32bit mmio: [0xe8000000-0xe807ffff]
[ 0.158966] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[ 0.159033] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 0.159145] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.159210] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.159275] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.159342] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.159415] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8080000-0xe80803ff]
[ 0.159483] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.159489] pci 0000:00:1d.7: PME# disabled
[ 0.159595] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.159604] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4
ACPI/GPIO/TCO
[ 0.159609] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4
GPIO
[ 0.159639] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.159648] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.159656] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.159665] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.159673] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.159682] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.159745] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[ 0.159803] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.159812] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.159820] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe8080c00-0xe8080dff]
[ 0.159828] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe8080800-0xe80808ff]
[ 0.159864] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.159870] pci 0000:00:1f.5: PME# disabled
[ 0.159930] pci 0000:03:08.0: reg 10 32bit mmio: [0xe8110000-0xe8110fff]
[ 0.159939] pci 0000:03:08.0: reg 14 io port: [0x2000-0x203f]
[ 0.159985] pci 0000:03:08.0: supports D1 D2
[ 0.159988] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160013] pci 0000:03:08.0: PME# disabled
[ 0.160059] pci 0000:03:0a.0: reg 10 32bit mmio: [0xe8100000-0xe810ffff]
[ 0.160069] pci 0000:03:0a.0: reg 14 io port: [0x2040-0x2047]
[ 0.160115] pci 0000:03:0a.0: PME# supported from D3hot D3cold
[ 0.160120] pci 0000:03:0a.0: PME# disabled
[ 0.160157] pci 0000:00:1e.0: transparent bridge
[ 0.160163] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.160169] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8100000-0xe81fffff]
[ 0.160184] pci_bus 0000:00: on NUMA node 0
[ 0.160193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.160396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
[ 0.259097] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14
15)
[ 0.259268] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14
15)
[ 0.259434] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14
15)
[ 0.259597] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14
15)
[ 0.259771] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14
15)
[ 0.259943] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14
15) *0, disabled.
[ 0.260136] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12 14
15)
[ 0.260312] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14
15)
[ 0.260514] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260529] vgaarb: loaded
[ 0.260751] SCSI subsystem initialized
[ 0.260876] libata version 3.00 loaded.
[ 0.261034] usbcore: registered new interface driver usbfs
[ 0.261057] usbcore: registered new interface driver hub
[ 0.261111] usbcore: registered new device driver usb
[ 0.261392] ACPI: WMI: Mapper loaded
[ 0.261397] PCI: Using ACPI for IRQ routing
[ 0.261711] NetLabel: Initializing
[ 0.261715] NetLabel: domain hash size = 128
[ 0.261717] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.261741] NetLabel: unlabeled traffic allowed by default
[ 0.261915] hpet clockevent registered
[ 0.261921] HPET: 3 timers in total, 0 timers will be used for per-cpu
timer
[ 0.261929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.261936] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.264027] Switching to clocksource tsc
[ 0.266934] AppArmor: AppArmor Filesystem Enabled
[ 0.266968] pnp: PnP ACPI init
[ 0.267001] ACPI: bus type pnp registered
[ 0.302149] pnp: PnP ACPI: found 13 devices
[ 0.302156] ACPI: ACPI bus type pnp unregistered
[ 0.302162] PnPBIOS: Disabled by ACPI PNP
[ 0.302188] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.302193] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.302197] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.302201] system 00:01: ioport range 0x1100-0x111f has been reserved
[ 0.302205] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.302210] system 00:01: ioport range 0xe000-0xe00f has been reserved
[ 0.302214] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.302219] system 00:01: ioport range 0xfe10-0xfe11 has been reserved
[ 0.302225] system 00:01: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 0.302229] system 00:01: iomem range 0xfed90000-0xfed903ff has been
reserved
[ 0.337085] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.337091] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.337099] pci 0000:00:1e.0: MEM window: 0xe8100000-0xe81fffff
[ 0.337104] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.337126] pci 0000:00:1e.0: setting latency timer to 64
[ 0.337133] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.337137] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.337141] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.337145] pci_bus 0000:03: resource 1 mem: [0xe8100000-0xe81fffff]
[ 0.337149] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.337152] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.337216] NET: Registered protocol family 2
[ 0.337365] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.337946] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.338891] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.339386] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.339392] TCP reno registered
[ 0.339590] NET: Registered protocol family 1
[ 0.339627] pci 0000:00:02.0: Boot video device
[ 0.339844] pci 0000:03:08.0: Firmware left e100 interrupts enabled;
disabling
[ 0.340009] Simple Boot Flag at 0x35 set to 0x1
[ 0.340183] cpufreq-nforce2: No nForce2 chipset.
[ 0.340232] Scanning for low memory corruption every 60 seconds
[ 0.340422] audit: initializing netlink socket (disabled)
[ 0.340440] type=2000 audit(1279653791.339:1): initialized
[ 0.351199] Trying to unpack rootfs image as initramfs...
[ 0.364282] highmem bounce pool size: 64 pages
[ 0.364294] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.366426] VFS: Disk quotas dquot_6.5.2
[ 0.366536] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.372629] fuse init (API version 7.13)
[ 0.372827] msgmni has been set to 1705
[ 0.373250] alg: No test for stdrng (krng)
[ 0.373383] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.373388] io scheduler noop registered
[ 0.373391] io scheduler anticipatory registered
[ 0.373394] io scheduler deadline registered
[ 0.373461] io scheduler cfq registered (default)
[ 0.373629] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.373673] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.373841] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 0.373848] ACPI: Power Button [PWRB]
[ 0.373922] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.373927] ACPI: Power Button [PWRF]
[ 0.374220] processor LNXCPU:00: registered as cooling_device0
[ 0.420265] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.420284] ACPI: Thermal Zone [THM0] (67 C)
[ 0.428108] isapnp: Scanning for PnP cards...
[ 0.433980] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.434111] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.434751] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.436402] brd: module loaded
[ 0.437166] loop: module loaded
[ 0.437356] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 0.437535] ata_piix 0000:00:1f.1: version 2.13
[ 0.437555] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.437569] alloc irq_desc for 18 on node -1
[ 0.437572] alloc kstat_irqs on node -1
[ 0.437583] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 0.437646] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.483625] scsi0 : ata_piix
[ 0.483851] scsi1 : ata_piix
[ 0.485438] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq
14
[ 0.485443] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq
15
[ 0.486085] Fixed MDIO Bus: probed
[ 0.486150] PPP generic driver version 2.4.2
[ 0.486265] tun: Universal TUN/TAP device driver, 1.6
[ 0.486270] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.486439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.486484] alloc irq_desc for 23 on node -1
[ 0.486489] alloc kstat_irqs on node -1
[ 0.486500] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) ->
IRQ 23
[ 0.486528] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.486534] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.486613] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 0.486655] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.490555] ehci_hcd 0000:00:1d.7: cache line size of 128 is not
supported
[ 0.496251] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8080000
[ 0.516185] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.516430] usb usb1: configuration #1 chosen from 1 choice
[ 0.516482] hub 1-0:1.0: USB hub found
[ 0.516502] hub 1-0:1.0: 8 ports detected
[ 0.516615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.516643] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.516713] alloc irq_desc for 16 on node -1
[ 0.516717] alloc kstat_irqs on node -1
[ 0.516729] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.516741] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.516746] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.516845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 0.516890] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 0.517055] usb usb2: configuration #1 chosen from 1 choice
[ 0.517108] hub 2-0:1.0: USB hub found
[ 0.517123] hub 2-0:1.0: 2 ports detected
[ 0.517196] alloc irq_desc for 19 on node -1
[ 0.517200] alloc kstat_irqs on node -1
[ 0.517210] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 0.517221] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.517225] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.517307] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 0.517346] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.517503] usb usb3: configuration #1 chosen from 1 choice
[ 0.517556] hub 3-0:1.0: USB hub found
[ 0.517569] hub 3-0:1.0: 2 ports detected
[ 0.517640] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 0.517653] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.517658] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.517735] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 0.517775] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.517946] usb usb4: configuration #1 chosen from 1 choice
[ 0.517998] hub 4-0:1.0: USB hub found
[ 0.518012] hub 4-0:1.0: 2 ports detected
[ 0.518092] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.518105] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.518110] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.518202] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 0.518235] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.518393] usb usb5: configuration #1 chosen from 1 choice
[ 0.518441] hub 5-0:1.0: USB hub found
[ 0.518454] hub 5-0:1.0: 2 ports detected
[ 0.518607] PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
[ 0.518611] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.519086] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.524173] mice: PS/2 mouse device common for all mice
[ 0.524403] rtc_cmos 00:04: RTC can wake from S4
[ 0.524502] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.524536] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.524731] device-mapper: uevent: version 1.0.3
[ 0.524964] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 0.525084] device-mapper: multipath: version 1.1.0 loaded
[ 0.525090] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.528082] EISA: Probing bus 0 at eisa.0
[ 0.528094] Cannot allocate resource for EISA slot 1
[ 0.528099] Cannot allocate resource for EISA slot 2
[ 0.528126] EISA: Detected 0 cards.
[ 0.528244] cpuidle: using governor ladder
[ 0.528249] cpuidle: using governor menu
[ 0.528965] TCP cubic registered
[ 0.529180] NET: Registered protocol family 10
[ 0.529854] lo: Disabled Privacy Extensions
[ 0.530367] NET: Registered protocol family 17
[ 0.530465] Using IPI No-Shortcut mode
[ 0.530642] PM: Resume from disk failed.
[ 0.530662] registered taskstats version 1
[ 0.530897] Magic number: 2:348:395
[ 0.530996] rtc_cmos 00:04: setting system clock to 2010-07-20 19:23:11
UTC (1279653791)
[ 0.531002] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.531004] EDD information not available.
[ 0.547294] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[ 0.693096] ata2.00: ATAPI: JLMS XJ-HD166S, DUS1, max UDMA/33
[ 0.693833] ata2.01: ATA-7: HDS728080PLAT20 40Y9026LEN,
PF2OA29A, max UDMA/133
[ 0.693838] ata2.01: 156312576 sectors, multi 16: LBA48
[ 0.694364] ata2.00: configured for UDMA/33
[ 0.716453] ata2.01: configured for UDMA/100
[ 1.115714] isapnp: No Plug & Play device found
[ 1.224094] usb 2-1: new full speed USB device using uhci_hcd and address
2
[ 1.271264] Freeing initrd memory: 13378k freed
[ 1.427982] usb 2-1: configuration #1 chosen from 1 choice
[ 1.668018] usb 3-2: new low speed USB device using uhci_hcd and address
2
[ 1.836326] usb 3-2: configuration #1 chosen from 1 choice
[ 5.708017] ata1: link is slow to respond, please be patient (ready=0)
[ 10.524015] ata1: SRST failed (errno=-16)
[ 15.720013] ata1: link is slow to respond, please be patient (ready=0)
[ 20.536013] ata1: SRST failed (errno=-16)
[ 25.732013] ata1: link is slow to respond, please be patient (ready=0)
[ 50.540066] ata1.01: link status unknown, clearing UNKNOWN to NONE
[ 50.572439] ata1.00: ATA-6: WDC WD400BB-23FJA0, 13.03G13, max UDMA/100
[ 50.572444] ata1.00: 78156288 sectors, multi 16: LBA
[ 50.588361] ata1.00: configured for UDMA/100
[ 50.588557] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-23FJ
13.0 PQ: 0 ANSI: 5
[ 50.588812] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 50.589131] sd 0:0:0:0: [sda] 78156288 512-byte logical blocks: (40.0
GB/37.2 GiB)
[ 50.589258] scsi 1:0:0:0: CD-ROM JLMS XJ-HD166S
DUS1 PQ: 0 ANSI: 5
[ 50.589648] sd 0:0:0:0: [sda] Write Protect is off
[ 50.589654] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 50.589816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 50.590390] sda:sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 50.591278] Uniform CD-ROM driver Revision: 3.20
[ 50.591458] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 50.591569] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 50.591780] scsi 1:0:1:0: Direct-Access ATA HDS728080PLAT20
PF2O PQ: 0 ANSI: 5
[ 50.592114] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 50.592283] sd 1:0:1:0: [sdb] 156312576 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 50.592383] sd 1:0:1:0: [sdb] Write Protect is off
[ 50.592388] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 50.592431] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 50.592708] sdb: sda1 sda2 sda3 sda4
[ 50.617539] sd 0:0:0:0: [sda] Attached SCSI disk
[ 80.816025] ata2: lost interrupt (Status 0x58)
[ 80.820003] ata2: drained 32768 bytes to clear DRQ.
[ 80.883112] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 80.883119] ata2.01: failed command: READ DMA
[ 80.883127] ata2.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma
4096 in
[ 80.883129] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4
(timeout)
[ 80.883133] ata2.01: status: { DRDY }
[ 80.883166] ata2: soft resetting link
[ 81.053407] ata2.00: configured for UDMA/33
[ 81.076389] ata2.01: configured for UDMA/100
[ 81.076608] ata2.01: device reported invalid CHS sector 0
[ 81.076622] ata2: EH complete
[ 111.816022] ata2: lost interrupt (Status 0x58)
[ 111.820004] ata2: drained 32768 bytes to clear DRQ.
[ 111.883104] ata2.01: limiting speed to UDMA/66:PIO4
[ 111.883110] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 111.883116] ata2.01: failed command: READ DMA
[ 111.883123] ata2.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma
4096 in
[ 111.883125] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4
(timeout)
[ 111.883129] ata2.01: status: { DRDY }
[ 111.883158] ata2: soft resetting link
[ 112.053406] ata2.00: configured for UDMA/33
[ 112.076389] ata2.01: configured for UDMA/66
[ 112.076598] ata2.01: device reported invalid CHS sector 0
[ 112.076610] ata2: EH complete
[ 142.816025] ata2: lost interrupt (Status 0x58)
[ 142.820004] ata2: drained 32768 bytes to clear DRQ.
[ 142.883105] ata2.01: limiting speed to UDMA/33:PIO4
[ 142.883111] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 142.883116] ata2.01: failed command: READ DMA
[ 142.883124] ata2.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma
4096 in
[ 142.883126] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4
(timeout)
[ 142.883130] ata2.01: status: { DRDY }
[ 142.883159] ata2: soft resetting link
[ 143.053397] ata2.00: configured for UDMA/33
[ 143.076389] ata2.01: configured for UDMA/33
[ 143.076597] ata2.01: device reported invalid CHS sector 0
[ 143.076610] ata2: EH complete
[ 173.816025] ata2: lost interrupt (Status 0x58)
[ 173.820004] ata2: drained 32768 bytes to clear DRQ.
[ 173.883102] ata2.01: limiting speed to PIO4
[ 173.883107] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 173.883112] ata2.01: failed command: READ DMA
[ 173.883119] ata2.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma
4096 in
[ 173.883121] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4
(timeout)
[ 173.883125] ata2.01: status: { DRDY }
[ 173.883153] ata2: soft resetting link
[ 174.053385] ata2.00: configured for UDMA/33
[ 174.076388] ata2.01: configured for PIO4
[ 174.076588] ata2.01: device reported invalid CHS sector 0
[ 174.076599] ata2: EH complete
[ 174.085229] unknown partition table
[ 174.085586] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 174.085610] Freeing unused kernel memory: 656k freed
[ 174.086413] Write protecting the kernel text: 4676k
[ 174.086451] Write protecting the kernel read-only data: 1840k
[ 174.088226] sdb: detected capacity change from 0 to 80032038912
[ 174.088446] sdb: detected capacity change from 0 to 80032038912
[ 174.131825] udev: starting version 151
[ 174.453044] Floppy drive(s): fd0 is 1.44M
[ 174.475996] FDC 0 is a post-1991 82077
[ 174.587008] Linux agpgart interface v0.103
[ 174.614009] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 174.614016] e100: Copyright(c) 1999-2006 Intel Corporation
[ 174.614084] alloc irq_desc for 20 on node -1
[ 174.614089] alloc kstat_irqs on node -1
[ 174.614100] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 174.637263] e100 0000:03:08.0: PME# disabled
[ 174.704139] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 174.704396] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 174.721973] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 174.740981] e100: eth0: e100_probe: addr 0xe8110000, irq 20, MAC addr
00:0d:60:ae:12:c2
[ 174.749422] [drm] Initialized drm 1.1.0 20060810
[ 174.758886] usbcore: registered new interface driver hiddev
[ 174.774209] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 174.774443] generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11
Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 174.774571] usbcore: registered new interface driver usbhid
[ 174.774577] usbhid: v2.6:USB HID core driver
[ 174.793487] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 174.793497] i915 0000:00:02.0: setting latency timer to 64
[ 174.801758] [drm] set up 7M of stolen space
[ 174.829612] [drm] initialized overlay support
[ 174.992166] fb0: inteldrmfb frame buffer device
[ 174.992172] registered panic notifier
[ 174.992187] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 174.996764] vga16fb: initializing
[ 174.996778] vga16fb: mapped to 0xc00a0000
[ 174.996786] vga16fb: not registering due to another framebuffer present
[ 175.120493] Console: switching to colour frame buffer device 128x48
[ 175.658845] xor: automatically using best checksumming function: pIII_sse
[ 175.676011] pIII_sse : 3888.000 MB/sec
[ 175.676015] xor: using function: pIII_sse (3888.000 MB/sec)
[ 175.685517] device-mapper: dm-raid45: initialized v0.2594b
[ 176.017132] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 185.702469] Adding 522104k swap on /dev/sda3. Priority:-1 extents:1
across:522104k
[ 185.755515] udev: starting version 151
[ 185.945857] lp: driver loaded but no devices found
[ 186.325593] parport_pc 00:0c: reported by Plug and Play ACPI
[ 186.325661] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 186.328441] intel_rng: Firmware space is locked read-only. If you can't
or
[ 186.328445] intel_rng: don't want to disable this in firmware setup, and
if
[ 186.328446] intel_rng: you are certain that your system has a functional
[ 186.328448] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 186.328808] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 186.418067] lp0: using parport0 (interrupt-driven).
[ 186.579700] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2
vid 0x03F0 pid 0x7D04
[ 186.580798] usbcore: registered new interface driver usblp
[ 186.827410] ppdev: user-space parallel port driver
[ 187.028493] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 187.355682] alloc irq_desc for 17 on node -1
[ 187.355687] alloc kstat_irqs on node -1
[ 187.355700] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 187.355758] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 187.800725] intel8x0_measure_ac97_clock: measured 53057 usecs (2557
samples)
[ 187.800731] intel8x0: clocking to 48000
[ 188.089183] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 188.092180] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 188.093337] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 191.654180] usb 2-1: usbfs: interface 1 claimed by usblp while 'usb' sets
config #1
[ 199.008043] eth0: no IPv6 routers present
[ 233.896022] usb 1-8: new high speed USB device using ehci_hcd and address
4
[ 234.030878] usb 1-8: configuration #1 chosen from 1 choice
[ 234.098797] Initializing USB Mass Storage driver...
[ 234.099029] scsi2 : SCSI emulation for USB Mass Storage devices
[ 234.099431] usbcore: registered new interface driver usb-storage
[ 234.099438] USB Mass Storage support registered.
[ 234.110793] usb-storage: device found at 4
[ 234.110798] usb-storage: waiting for device to settle before scanning
[ 239.108229] usb-storage: device scan complete
[ 239.108954] scsi 2:0:0:0: Direct-Access USBDisk RunDisk
1.00 PQ: 0 ANSI: 2
[ 239.115011] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 239.118079] sd 2:0:0:0: [sdc] 16039872 512-byte logical blocks: (8.21
GB/7.64 GiB)
[ 239.118572] sd 2:0:0:0: [sdc] Write Protect is off
[ 239.118579] sd 2:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 239.118583] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 239.131947] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 239.131961] sdc: sdc1
[ 239.283055] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 239.283068] sd 2:0:0:0: [sdc] Attached SCSI removable disk
I look forward to your analysis.
Zed
--
zed
Diplomacy: Saying "nice doggy" until you find a gun