[ltp] no color: tv-out on R51 with radeon 7500
Florian Dorpmueller
linux-thinkpad@linux-thinkpad.org
Mon, 7 Jun 2010 18:37:10 +0000
--_9f53b371-517b-4134-85e3-a995c4bd1bf5_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hello Alex=2C
thanks for the hint. "xrandr --output S-video --set "tv standard" pal" brou=
ght back the color but now I have a picture with grey stripes. Any more rec=
ommendations?
Here the output of "xrandr --verbose":
Screen 0: minimum 320 x 200=2C current 800 x 600=2C maximum 4096 x 4096
VGA-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x51
Timestamp: 1296457
Subpixel: no subpixels
Clones: =20
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:=20
load detection: 1 (0x00000001) range: (0=2C1)
DVI-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x52
Timestamp: 1296457
Subpixel: horizontal rgb
Clones: =20
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:=20
load detection: 1 (0x00000001) range: (0=2C1)
LVDS connected 800x600+0+0 (0x59) normal (normal left inverted right x axis=
y axis) 0mm x 0mm
Identifier: 0x53
Timestamp: 1296457
Subpixel: horizontal rgb
Clones: =20
CRTC: 0
CRTCs: 0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:=20
scaling mode: Full
supported: None Full Center Full aspect=20
1024x768 (0x55) 65.0MHz +preferred
h: width 1024 start 1040 end 1176 total 1336 skew 0 clock 48.=
7KHz
v: height 768 start 769 end 775 total 805 clock 60.=
4Hz
1360x768 (0x56) 84.8MHz -HSync +VSync
h: width 1360 start 1432 end 1568 total 1776 skew 0 clock 47.=
7KHz
v: height 768 start 771 end 781 total 798 clock 59.=
8Hz
1024x768 (0x57) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.=
4KHz
v: height 768 start 771 end 777 total 806 clock 60.=
0Hz
800x600 (0x58) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.=
9KHz
v: height 600 start 601 end 605 total 628 clock 60.=
3Hz
800x600 (0x59) 38.2MHz -HSync +VSync *current
h: width 800 start 832 end 912 total 1024 skew 0 clock 37.=
4KHz
v: height 600 start 603 end 607 total 624 clock 59.=
9Hz
848x480 (0x5a) 31.5MHz -HSync +VSync
h: width 848 start 872 end 952 total 1056 skew 0 clock 29.=
8KHz
v: height 480 start 483 end 493 total 500 clock 59.=
7Hz
720x480 (0x5b) 26.8MHz -HSync +VSync
h: width 720 start 744 end 808 total 896 skew 0 clock 29.=
9KHz
v: height 480 start 483 end 493 total 500 clock 59.=
7Hz
640x480 (0x5c) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.=
5KHz
v: height 480 start 490 end 492 total 525 clock 59.=
9Hz
640x480 (0x5d) 23.8MHz -HSync +VSync
h: width 640 start 664 end 720 total 800 skew 0 clock 29.=
7KHz
v: height 480 start 483 end 487 total 500 clock 59.=
4Hz
S-video connected 800x600+0+0 (0x59) normal (normal left inverted right x a=
xis y axis) 0mm x 0mm
Identifier: 0x54
Timestamp: 1296457
Subpixel: no subpixels
Clones: =20
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:=20
tv standard: pal
supported: ntsc pal pal-m pal-60 =20
ntsc-j scart-pal pal-cn secam =20
load detection: 1 (0x00000001) range: (0=2C1)
800x600 (0x59) 38.2MHz -HSync +VSync *current +preferred
h: width 800 start 832 end 912 total 1024 skew 0 clock 37.=
4KHz
v: height 600 start 603 end 607 total 624 clock 59.=
9Hz
640x480 (0x5c) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.=
5KHz
v: height 480 start 490 end 492 total 525 clock 59.=
9Hz
Thanks=2C
Florian
> Subject: Re: [ltp] no color: tv-out on R51 with radeon 7500
> From: alexdeucher@gmail.com
> To: linux-thinkpad@linux-thinkpad.org
> Date: Mon=2C 7 Jun 2010 00:47:34 -0400
>=20
> On Sat=2C Jun 5=2C 2010 at 5:17 AM=2C Florian Dorpmueller
> <dorpmueller@hotmail.com> wrote:
> > Hello=2C
> >
> > after upgrading to Ubuntu 10.04 the tv-out only displayes black and whi=
te .
> >
> > "xrandr --output S-video --set load_detection 1" gives me
> >
> > X Error of failed request: BadName (named color or font does not exist=
)
> > Major opcode of failed request: 149 (RANDR)
> > Minor opcode of failed request: 11 (RRQueryOutputProperty)
> > Serial number of failed request: 29
> > Current serial number in output stream: 29
> >
> > and
> >
> > "xrandr --output TV --set TV_FORMAT PAL"
> >
> > warning: output TV not found=3B ignoring
> > X Error of failed request: BadRROutput (invalid Output parameter)
> > Major opcode of failed request: 149 (RANDR)
> > Minor opcode of failed request: 15 (RRGetOutputProperty)
> > Serial number of failed request: 28
> > Current serial number in output stream: 28
> >
>=20
> Under kms=2C the attributes are:
> "load detection" and "tv standard"
> and load detection defaults to on. Also=2C the the output name is S-vide=
o not TV.
> e.g.=2C
> xrandr --output S-video --set "tv standard" pal
> You can use xrandr --verbose to print out the attribute names and
> potential values.
>=20
> Alex
> --=20
> The linux-thinkpad mailing list home page is at:
> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
=20
_________________________________________________________________
http://redirect.gimas.net/?n=3DM1006xHMTL5
Tsch=FCss Werbung im E-Mail-Abbinder!=
--_9f53b371-517b-4134-85e3-a995c4bd1bf5_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 10pt=3B
font-family:Verdana
}
--></style>
</head>
<body class=3D'hmmessage'>
Hello Alex=2C<br><br>thanks for the hint. "xrandr --output S-video --set "t=
v standard" pal" brought back the color but now I have a picture with grey =
stripes. Any more recommendations?<br><br>Here the output of "xrandr --verb=
ose":<br><br>Screen 0: minimum 320 x 200=2C current 800 x 600=2C maximum 40=
96 x 4096<br>VGA-0 disconnected (normal left inverted right x axis y axis)<=
br> =3B =3B =3B Identifier: 0x51<br> =3B =3B =3B Ti=
mestamp: =3B 1296457<br> =3B =3B =3B Subpixel: =3B =
=3B no subpixels<br> =3B =3B =3B Clones: =3B =3B =
=3B <br> =3B =3B =3B CRTCs: =3B =3B =3B =3B&nbs=
p=3B 0 1<br> =3B =3B =3B Transform: =3B 1.000000 0.000000 0=
.000000<br> =3B =3B =3B  =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B 0.000000 1.000000 0.000=
000<br> =3B =3B =3B  =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B 0.000000 0.000000 1.000000<br=
> =3B =3B =3B  =3B =3B =3B =3B =3B =3B&=
nbsp=3B =3B =3B =3B filter: <br> =3B =3B =3B load d=
etection: 1 (0x00000001) =3B =3B =3B range: =3B (0=2C1)<br>=
DVI-0 disconnected (normal left inverted right x axis y axis)<br> =3B&n=
bsp=3B =3B Identifier: 0x52<br> =3B =3B =3B Timestamp: =
=3B 1296457<br> =3B =3B =3B Subpixel: =3B =3B horizonta=
l rgb<br> =3B =3B =3B Clones: =3B =3B =3B <br> =
=3B =3B =3B CRTCs: =3B =3B =3B =3B =3B 0 1<br>&=
nbsp=3B =3B =3B Transform: =3B 1.000000 0.000000 0.000000<br>&n=
bsp=3B =3B =3B  =3B =3B =3B =3B =3B =3B&nbs=
p=3B =3B =3B =3B =3B 0.000000 1.000000 0.000000<br> =3B=
 =3B =3B  =3B =3B =3B =3B =3B =3B =3B&n=
bsp=3B =3B =3B =3B 0.000000 0.000000 1.000000<br> =3B =
=3B =3B  =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B filter: <br> =3B =3B =3B load detection: 1 =
(0x00000001) =3B =3B =3B range: =3B (0=2C1)<br>LVDS connect=
ed 800x600+0+0 (0x59) normal (normal left inverted right x axis y axis) 0mm=
x 0mm<br> =3B =3B =3B Identifier: 0x53<br> =3B =3B&nbs=
p=3B Timestamp: =3B 1296457<br> =3B =3B =3B Subpixel: =
=3B =3B horizontal rgb<br> =3B =3B =3B Clones: =3B =
=3B =3B <br> =3B =3B =3B CRTC: =3B =3B =3B =
=3B =3B =3B 0<br> =3B =3B =3B CRTCs: =3B =3B&nb=
sp=3B =3B =3B 0<br> =3B =3B =3B Transform: =3B 1.00=
0000 0.000000 0.000000<br> =3B =3B =3B  =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B 0.000000 1=
.000000 0.000000<br> =3B =3B =3B  =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B 0.000000 0.0000=
00 1.000000<br> =3B =3B =3B  =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B filter: <br> =3B =3B&=
nbsp=3B scaling mode: =3B =3B =3B Full<br> =3B =3B =
=3B  =3B =3B =3B supported: None =3B =3B =3B =
=3B =3B =3B =3B =3B Full =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B Center =3B =3B =3B =3B =
=3B =3B Full aspect <br> =3B 1024x768 (0x55) =3B =3B 65.0MH=
z +preferred<br> =3B =3B =3B =3B =3B =3B =3B h:=
width =3B 1024 start 1040 end 1176 total 1336 skew =3B =3B&nbs=
p=3B 0 clock =3B =3B 48.7KHz<br> =3B =3B =3B =3B&nb=
sp=3B =3B =3B v: height =3B 768 start =3B 769 end =3B 7=
75 total =3B 805 =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B clock =3B =3B 60.4Hz<br> =3B 1360x7=
68 (0x56) =3B =3B 84.8MHz -HSync +VSync<br> =3B =3B =3B=
 =3B =3B =3B =3B h: width =3B 1360 start 1432 end 1568 =
total 1776 skew =3B =3B =3B 0 clock =3B =3B 47.7KHz<br>=
 =3B =3B =3B =3B =3B =3B =3B v: height =3B =
768 start =3B 771 end =3B 781 total =3B 798 =3B =3B&nbs=
p=3B =3B =3B =3B =3B =3B =3B =3B clock =3B&=
nbsp=3B 59.8Hz<br> =3B 1024x768 (0x57) =3B =3B 65.0MHz -HSync -=
VSync<br> =3B =3B =3B =3B =3B =3B =3B h: width&=
nbsp=3B 1024 start 1048 end 1184 total 1344 skew =3B =3B =3B 0 =
clock =3B =3B 48.4KHz<br> =3B =3B =3B =3B =3B&n=
bsp=3B =3B v: height =3B 768 start =3B 771 end =3B 777 tota=
l =3B 806 =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B clock =3B =3B 60.0Hz<br> =3B 800x600 (0x58)=
 =3B =3B 40.0MHz +HSync +VSync<br> =3B =3B =3B =3B&=
nbsp=3B =3B =3B h: width =3B =3B 800 start =3B 840 end&=
nbsp=3B 968 total 1056 skew =3B =3B =3B 0 clock =3B =3B=
37.9KHz<br> =3B =3B =3B =3B =3B =3B =3B v: hei=
ght =3B 600 start =3B 601 end =3B 605 total =3B 628 =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B cl=
ock =3B =3B 60.3Hz<br> =3B 800x600 (0x59) =3B =3B 38.2M=
Hz -HSync +VSync *current<br> =3B =3B =3B =3B =3B =
=3B =3B h: width =3B =3B 800 start =3B 832 end =3B 912 =
total 1024 skew =3B =3B =3B 0 clock =3B =3B 37.4KHz<br>=
 =3B =3B =3B =3B =3B =3B =3B v: height =3B =
600 start =3B 603 end =3B 607 total =3B 624 =3B =3B&nbs=
p=3B =3B =3B =3B =3B =3B =3B =3B clock =3B&=
nbsp=3B 59.9Hz<br> =3B 848x480 (0x5a) =3B =3B 31.5MHz -HSync +V=
Sync<br> =3B =3B =3B =3B =3B =3B =3B h: width&n=
bsp=3B =3B 848 start =3B 872 end =3B 952 total 1056 skew =
=3B =3B =3B 0 clock =3B =3B 29.8KHz<br> =3B =3B&nbs=
p=3B =3B =3B =3B =3B v: height =3B 480 start =3B 48=
3 end =3B 493 total =3B 500 =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B clock =3B =3B 59.7Hz<br>&n=
bsp=3B 720x480 (0x5b) =3B =3B 26.8MHz -HSync +VSync<br> =3B&nbs=
p=3B =3B =3B =3B =3B =3B h: width =3B =3B 720 s=
tart =3B 744 end =3B 808 total =3B 896 skew =3B =3B&nbs=
p=3B 0 clock =3B =3B 29.9KHz<br> =3B =3B =3B =3B&nb=
sp=3B =3B =3B v: height =3B 480 start =3B 483 end =3B 4=
93 total =3B 500 =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B clock =3B =3B 59.7Hz<br> =3B 640x48=
0 (0x5c) =3B =3B 25.2MHz -HSync -VSync<br> =3B =3B =3B&=
nbsp=3B =3B =3B =3B h: width =3B =3B 640 start =3B =
656 end =3B 752 total =3B 800 skew =3B =3B =3B 0 clock&=
nbsp=3B =3B 31.5KHz<br> =3B =3B =3B =3B =3B =3B=
 =3B v: height =3B 480 start =3B 490 end =3B 492 total =
=3B 525 =3B =3B =3B =3B =3B =3B =3B =3B&nbs=
p=3B =3B clock =3B =3B 59.9Hz<br> =3B 640x480 (0x5d) =
=3B =3B 23.8MHz -HSync +VSync<br> =3B =3B =3B =3B =
=3B =3B =3B h: width =3B =3B 640 start =3B 664 end =
=3B 720 total =3B 800 skew =3B =3B =3B 0 clock =3B =
=3B 29.7KHz<br> =3B =3B =3B =3B =3B =3B =3B v: =
height =3B 480 start =3B 483 end =3B 487 total =3B 500 =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
clock =3B =3B 59.4Hz<br>S-video connected 800x600+0+0 (0x59) norma=
l (normal left inverted right x axis y axis) 0mm x 0mm<br> =3B =3B&=
nbsp=3B Identifier: 0x54<br> =3B =3B =3B Timestamp: =3B 129=
6457<br> =3B =3B =3B Subpixel: =3B =3B no subpixels<br>=
 =3B =3B =3B Clones: =3B =3B =3B <br> =3B =
=3B =3B CRTC: =3B =3B =3B =3B =3B =3B 1<br>&nbs=
p=3B =3B =3B CRTCs: =3B =3B =3B =3B =3B 0 1<br>=
 =3B =3B =3B Transform: =3B 1.000000 0.000000 0.000000<br>&=
nbsp=3B =3B =3B  =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B 0.000000 1.000000 0.000000<br> =
=3B =3B =3B  =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B 0.000000 0.000000 1.000000<br> =3B&=
nbsp=3B =3B  =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B filter: <br> =3B =3B =3B tv standard:&nbs=
p=3B =3B =3B pal<br> =3B =3B =3B  =3B =3B =
=3B supported: ntsc =3B =3B =3B =3B =3B =3B =3B=
 =3B pal =3B =3B =3B =3B =3B =3B =3B =
=3B =3B pal-m =3B =3B =3B =3B =3B =3B =3B p=
al-60 =3B =3B =3B =3B =3B <br> =3B =3B =3B =
 =3B =3B =3B  =3B =3B =3B =3B =3B =3B&n=
bsp=3B =3B =3B =3B ntsc-j =3B =3B =3B =3B =
=3B =3B scart-pal =3B =3B =3B pal-cn =3B =3B =
=3B =3B =3B =3B secam =3B =3B =3B =3B =3B&n=
bsp=3B <br> =3B =3B =3B load detection: 1 (0x00000001) =3B&=
nbsp=3B =3B range: =3B (0=2C1)<br> =3B 800x600 (0x59) =3B&n=
bsp=3B 38.2MHz -HSync +VSync *current +preferred<br> =3B =3B =
=3B =3B =3B =3B =3B h: width =3B =3B 800 start =
=3B 832 end =3B 912 total 1024 skew =3B =3B =3B 0 clock&nbs=
p=3B =3B 37.4KHz<br> =3B =3B =3B =3B =3B =3B&nb=
sp=3B v: height =3B 600 start =3B 603 end =3B 607 total =3B=
624 =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B clock =3B =3B 59.9Hz<br> =3B 640x480 (0x5c) =3B=
 =3B 25.2MHz -HSync -VSync<br> =3B =3B =3B =3B =3B&=
nbsp=3B =3B h: width =3B =3B 640 start =3B 656 end =3B =
752 total =3B 800 skew =3B =3B =3B 0 clock =3B =3B =
31.5KHz<br> =3B =3B =3B =3B =3B =3B =3B v: heig=
ht =3B 480 start =3B 490 end =3B 492 total =3B 525 =3B&=
nbsp=3B =3B =3B =3B =3B =3B =3B =3B =3B clo=
ck =3B =3B 59.9Hz<br><br><br>Thanks=2C<br>Florian<br><br>>=3B Sub=
ject: Re: [ltp] no color: tv-out on R51 with radeon 7500<br>>=3B From: al=
exdeucher@gmail.com<br>>=3B To: linux-thinkpad@linux-thinkpad.org<br>>=
=3B Date: Mon=2C 7 Jun 2010 00:47:34 -0400<br>>=3B <br>>=3B On Sat=2C J=
un 5=2C 2010 at 5:17 AM=2C Florian Dorpmueller<br>>=3B <=3Bdorpmueller@=
hotmail.com>=3B wrote:<br>>=3B >=3B Hello=2C<br>>=3B >=3B<br>>=
=3B >=3B after upgrading to Ubuntu 10.04 the tv-out only displayes black =
and white .<br>>=3B >=3B<br>>=3B >=3B "xrandr --output S-video --se=
t load_detection 1" gives me<br>>=3B >=3B<br>>=3B >=3B X Error of f=
ailed request: =3B BadName (named color or font does not exist)<br>>=
=3B >=3B  =3B Major opcode of failed request: =3B 149 (RANDR)<br>=
>=3B >=3B  =3B Minor opcode of failed request: =3B 11 (RRQueryO=
utputProperty)<br>>=3B >=3B  =3B Serial number of failed request:&n=
bsp=3B 29<br>>=3B >=3B  =3B Current serial number in output stream:=
 =3B 29<br>>=3B >=3B<br>>=3B >=3B and<br>>=3B >=3B<br>>=
=3B >=3B "xrandr --output TV --set TV_FORMAT PAL"<br>>=3B >=3B<br>>=
=3B >=3B warning: output TV not found=3B ignoring<br>>=3B >=3B X Erro=
r of failed request: =3B BadRROutput (invalid Output parameter)<br>>=
=3B >=3B  =3B Major opcode of failed request: =3B 149 (RANDR)<br>=
>=3B >=3B  =3B Minor opcode of failed request: =3B 15 (RRGetOut=
putProperty)<br>>=3B >=3B  =3B Serial number of failed request:&nbs=
p=3B 28<br>>=3B >=3B  =3B Current serial number in output stream:&n=
bsp=3B 28<br>>=3B >=3B<br>>=3B <br>>=3B Under kms=2C the attributes=
are:<br>>=3B "load detection" and "tv standard"<br>>=3B and load detec=
tion defaults to on. Also=2C the the output name is S-video not TV.<br>>=
=3B e.g.=2C<br>>=3B xrandr --output S-video --set "tv standard" pal<br>&g=
t=3B You can use xrandr --verbose to print out the attribute names and<br>&=
gt=3B potential values.<br>>=3B <br>>=3B Alex<br>>=3B -- <br>>=3B T=
he linux-thinkpad mailing list home page is at:<br>>=3B http://mailman.li=
nux-thinkpad.org/mailman/listinfo/linux-thinkpad<br> <br /><hr /=
>Tsch=FCss Werbung <a href=3D'http://redirect.gimas.net/?n=3DM1006HMTL2' ta=
rget=3D'_new'>im E-Mail-Abbinder!</a></body>
</html>=
--_9f53b371-517b-4134-85e3-a995c4bd1bf5_--