[ltp] no color: tv-out on R51 with radeon 7500

Thu, 10 Jun 2010 09:44:55 -0500

An interesting background.....

On Wed, Jun 9, 2010 at 3:00 PM, Florian Dorpmueller
<dorpmueller@hotmail.com> wrote:
> Certainly. Please have a look at http://shaun.bplaced.net/screenshot.jpg
> there I have uploaded one in good resolution.
>
> Cheers,
> Florian
>
>> Subject: Re: [ltp] no color: tv-out on R51 with radeon 7500
>> From: alexdeucher@gmail.com
>> To: linux-thinkpad@linux-thinkpad.org
>> Date: Mon, 7 Jun 2010 15:24:47 -0400
>>
>> On Mon, Jun 7, 2010 at 2:37 PM, Florian Dorpmueller
>> <dorpmueller@hotmail.com> wrote:
>> > Hello Alex,
>> >
>> > thanks for the hint. "xrandr --output S-video --set "tv standard" pal"
>> > brought back the color but now I have a picture with grey stripes. Any
>> > more
>> > recommendations?
>>
>> Grey stripes? Got a screenshot?
>>
>> Alex
>>
>> >
>> > Here the output of "xrandr --verbose":
>> >
>> > Screen 0: minimum 320 x 200, current 800 x 600, maximum 4096 x 4096
>> > VGA-0 disconnected (normal left inverted right x axis y axis)
>> > =A0=A0=A0 Identifier: 0x51
>> > =A0=A0=A0 Timestamp:=A0 1296457
>> > =A0=A0=A0 Subpixel:=A0=A0 no subpixels
>> > =A0=A0=A0 Clones:
>> > =A0=A0=A0 CRTCs:=A0=A0=A0=A0=A0 0 1
>> > =A0=A0=A0 Transform:=A0 1.000000 0.000000 0 .000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 0.000000 1.000000 0.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 0.000000 0.000000 1.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 filter:
>> > =A0=A0=A0 load detection: 1 (0x00000001)=A0=A0=A0 range:=A0 (0,1)
>> > DVI-0 disconnected (normal left inverted right x axis y axis)
>> > =A0=A0=A0 Identifier: 0x52
>> > =A0=A0=A0 Timestamp:=A0 1296457
>> > =A0=A0=A0 Subpixel:=A0=A0 horizontal rgb
>> > =A0=A0=A0 Clones:
>> > =A0=A0=A0 CRTCs:=A0=A0=A0=A0=A0 0 1
>> > =A0=A0=A0 Transform:=A0 1.000000 0.000000 0.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 0.000000 1.000000 0.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 0.000000 0.000000 1.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 filter:
>> > =A0=A0=A0 load detection: 1 (0x00000001)=A0=A0=A0 range:=A0 (0,1)
>> > LVDS connected 800x600+0+0 (0x59) normal (normal left inverted right x
>> > axis
>> > y axis) 0mm x 0mm
>> > =A0=A0=A0 Identifier: 0x53
>> > =A0=A0=A0 Timestamp:=A0 1296457
>> > =A0=A0=A0 Subpixel:=A0=A0 horizontal rgb
>> > =A0=A0=A0 Clones:
>> > =A0=A0=A0 CRTC:=A0=A0=A0=A0=A0=A0 0
>> > =A0=A0=A0 CRTCs:=A0=A0=A0=A0=A0 0
>> > =A0=A0=A0 Transform:=A0 1.000000 0.000000 0.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 0.000000 1 .000000 0.00000=
0
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 0.000000 0.000000 1.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 filter:
>> > =A0=A0=A0 scaling mode:=A0=A0=A0 Full
>> > =A0=A0=A0 =A0=A0=A0 supported: None=A0=A0=A0=A0=A0=A0=A0=A0 Full=A0=A0=
=A0=A0=A0=A0=A0=A0 Center=A0=A0=A0=A0=A0=A0 Full aspect
>> > =A0 1024x768 (0x55)=A0=A0 65.0MHz +preferred
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0 1024 start 1040 end 1176 total 1336 =
skew=A0=A0=A0 0 clock
>> > 48 .7KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 768 start=A0 769 end=A0 775 total=
=A0 805=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 60.4Hz
>> > =A0 1360x768 (0x56)=A0=A0 84.8MHz -HSync +VSync
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0 1360 start 1432 end 1568 total 1776 =
skew=A0=A0=A0 0 clock
>> > 47.7KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 768 start=A0 771 end=A0 781 total=
=A0 798=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 59.8Hz
>> > =A0 1024x768 (0x57)=A0=A0 65.0MHz -HSync -VSync
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0 1024 start 1048 end 1184 total 1344 =
skew=A0=A0=A0 0 clock
>> > 48.4KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 768 start=A0 771 end=A0 777 total=
=A0 806=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 60.0Hz
>> > =A0 800x600 (0x58)=A0=A0 40.0MHz +HSync +VSync
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0=A0 800 start=A0 840 end=A0 968 total=
 1056 skew=A0=A0=A0 0 clock
>> > 37.9KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 600 start=A0 601 end=A0 605 total=
=A0 628=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 60.3Hz
>> > =A0 800x600 (0x59)=A0=A0 38.2MHz -HSync +VSync *current
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0=A0 800 start=A0 832 end=A0 912 total=
 1024 skew=A0=A0=A0 0 clock
>> > 37.4KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 600 start=A0 603 end=A0 607 total=
=A0 624=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 59.9Hz
>> > =A0 848x480 (0x5a)=A0=A0 31.5MHz -HSync +VSync
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0=A0 848 start=A0 872 end=A0 952 total=
 1056 skew=A0=A0=A0 0 clock
>> > 29.8KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 480 start=A0 483 end=A0 493 total=
=A0 500=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 59.7Hz
>> > =A0 720x480 (0x5b)=A0=A0 26.8MHz -HSync +VSync
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0=A0 720 start=A0 744 end=A0 808 total=
=A0 896 skew=A0=A0=A0 0 clock
>> > 29.9KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 480 start=A0 483 end=A0 493 total=
=A0 500=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 59.7Hz
>> > =A0 640x480 (0x5c)=A0=A0 25.2MHz -HSync -VSync
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0=A0 640 start=A0 656 end=A0 752 total=
=A0 800 skew=A0=A0=A0 0 clock
>> > 31.5KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 480 start=A0 490 end=A0 492 total=
=A0 525=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 59.9Hz
>> > =A0 640x480 (0x5d)=A0=A0 23.8MHz -HSync +VSync
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0=A0 640 start=A0 664 end=A0 720 total=
=A0 800 skew=A0=A0=A0 0 clock
>> > 29.7KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 480 start=A0 483 end=A0 487 total=
=A0 500=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 59.4Hz
>> > S-video connected 800x600+0+0 (0x59) normal (normal left inverted righ=
t
>> > x
>> > axis y axis) 0mm x 0mm
>> > =A0=A0=A0 Identifier: 0x54
>> > =A0=A0=A0 Timestamp:=A0 1296457
>> > =A0=A0=A0 Subpixel:=A0=A0 no subpixels
>> > =A0=A0=A0 Clones:
>> > =A0=A0=A0 CRTC:=A0=A0=A0=A0=A0=A0 1
>> > =A0=A0=A0 CRTCs:=A0=A0=A0=A0=A0 0 1
>> > =A0=A0=A0 Transform:=A0 1.000000 0.000000 0.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 0.000000 1.000000 0.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 0.000000 0.000000 1.000000
>> > =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 filter:
>> > =A0=A0=A0 tv standard:=A0=A0=A0 pal
>> > =A0=A0=A0 =A0=A0=A0 supported: ntsc=A0=A0=A0=A0=A0=A0=A0=A0 pal=A0=A0=
=A0=A0=A0=A0=A0=A0=A0 pal-m=A0=A0=A0=A0=A0=A0=A0 pal-60
>> > =A0=A0=A0 =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 ntsc-j=A0=A0=A0=A0=
=A0=A0 scart-pal=A0=A0=A0 pal-cn=A0=A0=A0=A0=A0=A0 secam
>> > =A0=A0=A0 load detection: 1 (0x00000001)=A0=A0=A0 range:=A0 (0,1)
>> > =A0 800x600 (0x59)=A0=A0 38.2MHz -HSync +VSync *current +preferred
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0=A0 800 start=A0 832 end=A0 912 total=
 1024 skew=A0=A0=A0 0 clock
>> > 37.4KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 600 start=A0 603 end=A0 607 total=
=A0 624=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 59.9Hz
>> > =A0 640x480 (0x5c)=A0=A0 25.2MHz -HSync -VSync
>> > =A0=A0=A0=A0=A0=A0=A0 h: width=A0=A0 640 start=A0 656 end=A0 752 total=
=A0 800 skew=A0=A0=A0 0 clock
>> > 31.5KHz
>> > =A0=A0=A0=A0=A0=A0=A0 v: height=A0 480 start=A0 490 end=A0 492 total=
=A0 525=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 clock
>> > 59.9Hz
>> >
>> >
>> > Thanks,
>> > Florian
>> >
>> >> Subject: Re: [ltp] no color: tv-out on R51 with radeon 7500
>> >> From: alexdeucher@gmail.com
>> >> To: linux-thinkpad@linux-thinkpad.org
>> >> Date: Mon, 7 Jun 2010 00:47:34 -0400
>> >>
>> >> On Sat, Jun 5, 2010 at 5:17 AM, Florian Dorpmueller
>> >> <dorpmueller@hotmail.com> wrote:
>> >> > Hello,
>> >> >
>> >> > after upgrading to Ubuntu 10.04 the tv-out only displayes black and
>> >> > white .
>> >> >
>> >> > "xrandr --output S-video --set load_detection 1" gives me
>> >> >
>> >> > X Error of failed request:=A0 BadName (named color or font does not
>> >> > exist)
>> >> > =A0 Major opcode of failed request:=A0 149 (RANDR)
>> >> > =A0 Minor opcode of failed request:=A0 11 (RRQueryOutputProperty)
>> >> > =A0 Serial number of failed request:=A0 29
>> >> > =A0 Current serial number in output stream:=A0 29
>> >> >
>> >> > and
>> >> >
>> >> > "xrandr --output TV --set TV_FORMAT PAL"
>> >> >
>> >> > warning: output TV not found; ignoring
>> >> > X Error of failed request:=A0 BadRROutput (invalid Output parameter=
)
>> >> > =A0 Major opcode of failed request:=A0 149 (RANDR)
>> >> > =A0 Minor opcode of failed request:=A0 15 (RRGetOutputProperty)
>> >> > =A0 Serial number of failed request:=A0 28
>> >> > =A0 Current serial number in output stream:=A0 28
>> >> >
>> >>
>> >> Under kms, the attributes are:
>> >> "load detection" and "tv standard"
>> >> and load detection defaults to on. Also, the the output name is S-vid=
eo
>> >> not TV.
>> >> e.g.,
>> >> xrandr --output S-video --set "tv standard" pal
>> >> You can use xrandr --verbose to print out the attribute names and
>> >> potential values.
>> >>
>> >> Alex
>> >> --
>> >> The linux-thinkpad mailing list home page is at:
>> >> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
>> >
>> > ________________________________
>> > Tsch=FCss Werbung im E-Mail-Abbinder!
>> --
>> The linux-thinkpad mailing list home page is at:
>> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
>
> ________________________________
> Tsch=FCss Werbung im E-Mail-Abbinder!

--=20
"As we open our newspapers or watch our television screens, we seem to
be continually assaulted by the fruits of Mankind's stupidity."
 -Roger Penrose