[ltp] PCMCIA CDROM drive

[Andreas Nolda]

 > I generally run the CDROM (which uses
 > a PCMCIA SCSI card, a rebranded Adaptec 1460A) along with a Xircom
 > ethernet/modem card.  The Xircom card takes IRQ 3 and the SCSI card for
 > the CDROM then gets IRQ 9.  This works fine.  However, as a test, I
 > tried using the SCSI card alone.  It then takes IRQ3 and I then get the
 > same sorts of timeout errors you are seeing.

After excluding IRQ 3 in /etc/pcmcia/config.opts, the PCMCIA SCSI card 
works (it uses IRQ 10).  Thank you!

Andreas Nolda
-- 
Andreas Nolda                    e-mail: andreas.nolda@rz.hu-berlin.de
Wissenschaftlicher Mitarbeiter              s-mail: Unter den Linden 6
                                                        D-10099 Berlin
Humboldt-Universität zu Berlin
Philosophische Fakultät II                    phone: ++49-30-20196-718
Institut für deutsche Sprache und Linguistik    fax: ++49-30-20196-729
----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html