[ltp] RE: Mwave/ACP modem and APM suspend

[Thomas Hood]

Thanks for checking, Till.

I tried doing this, making my AT init string look
more like yours, with my Xircom modem.  Still no peep
out of the ACP modem.   Hmm.

Thomas

--- Till.Straumann@tu-berlin.de wrote: 
> Here's what I (reproducably) do on my TP600E (2645-550):
> 
>  - make sure the loudspeaker is not switched off:
>    (repeatedly hitting <Fn>-<PgUp>).
> 
>  - insert my PCMCIA modem (Venus K56FLEX V.90 kfav163 PCMCIA
>    p52198) and run minicom using the default init:
> 
>     AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
> 
>  - do a "ATA" command -> the PCMCIA modem produces the
>    characteristic sounds.
> 
>  - Physically eject the PCMCIA modem (I guess this makes
>    it pretty sure I'm not using it for the next steps :-)
> 
>  - Start up mwavem, setserial etc. (In fact, I also can perform
>    this step before playing with the PCMCIA modem).
> 
>  - Start minicom on the ACP modem (again using what minicom
>    defaults to: AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
> 
>  - do a "ATA" command -> the ACP modem produces the anwering
>    sound sequence (as a matter of fact, I can distinguish
>    both modems because they produce quite different sounds)
> 
>  - I also can issue a "ATX3DT012345" (no connection to the
>    phoneline, therefore the X3) and listen to the DTMF tones
> 
>  ---> On my machine, it works.
> 
> Regards, Till.


____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html