[ltp] new gnome frontend for tpctl (AND FC1 ON T40P)

Neil Weisenfeld linux-thinkpad@linux-thinkpad.org
Sat, 08 Nov 2003 15:58:59 -0500

Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Sat, 2003-11-08 at 14:11, honey@gneek.com wrote:

> Doesn't for me on a T40!  Everything works fine (suspend-to-RAM, no
> problem with blanking etc.) except for suspend-to-disk, where I get
> the familiar corrupted X screen and hang - can't even switch back to
> a console.
> I assumed this was the DRI problem: you definitely have 3D enabled on
> the T40p and suspend-to-disk resumes ok on a normal Fedora install?

Well, not the cleanest update from RH9->Fedora in the world, however I'm
definitely running the stock kernel and I think a full Fedora system
now.  I get the corrupted X screen, but it refreshes after about 5
secs.  Unforunately, I need to try the ATI drivers, too, and I can
report on that later.  They weren't particularly well behaved under RH9
w.r.t. suspend.  But I need them, unfortunately, for work, and the
situation where the stock XFree86 drivers don't work well is a bit
complicated to feed back to the developers.

I've attached my XF86Config for reference.


Content-Disposition: attachment; filename=XF86Config-4
Content-Type: text/plain; name=XF86Config-4; charset=UTF-8
Content-Transfer-Encoding: 7bit

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "DevInputMice" "AlwaysCore"

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"

Section "Module"
	Load  "GLcore"		#NIW
	Load  "dbe"
	Load  "extmod"
	SubSection "extmod"	#NIW
		Option "omit xfree86-dga"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "ExplorerPS/2"
#	Option	    "Protocol" "PS/2"
#	Option	    "Device" "/dev/psaux"
	Option	    "Device" "/dev/imouse"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "off"

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "0"
	HorizSync    31.5 - 90.0
	VertRefresh  59.0 - 75.0
	Option	    "dpms"

Section "Device"
	Identifier  "Videocard0"
	Driver      "radeon"
	VendorName  "Videocard vendor"
	BoardName   "ATI Radeon Mobility M9"
	VideoRam    65536
	Option	    "AGPMode" "4"
	Option	    "CloneDisplay" "1"
        Option      "CloneMode" "1400x1050"
        Option	    "CloneHSync" "30.0-65.0"
	Option	    "CloneVRefresh" "50.0-120.0"
	Option	    "EnablePageFlip" "On"
	Option	    "EnableDepthMoves" "On"

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Depth     16
		Modes    "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"

Section "DRI"
	Group        0
	Mode         0666