[ltp] x61: Fan error
Thu, 02 Apr 2015 15:13:39 +1300
At 02:14 p.m. 2/04/2015, Helen Borrie wrote:
>Cut pieces of the draught strip to fit the areas. You will probably need to cut the sides of the tape to fit around the heatpipes at top and side. Keep the small offcuts for covering the ends and corners. Remove the backing strips and apply the foam strips firmly.
Missed a step, didn't I?
Thermal paste: put a 3mm spot of paste in the centre of the CPU and another in the centre of the heatsink base. Use a CLEAN edge of the credit card to smooth down so that the layer of paste on each is even only just opaque.
DON'T OMIT THIS! <G>
If there are any holes in the paste pads for the GPUs, carefully cut out the uneven edges using a clean edge of the card as a blade. Clean off any crumbs of paste that are left on the GPUs, wipe off with ppa and polish with a clean part of the mf cloth. Apply enough paste to both surfaces and scrape off excess, as you did with the CPU.
>That's it. Now, just work back in reverse, reassembling the machine. Before you proceed, though, get the Lenovo Product number and the FRU from the bottom of the fan assembly, in case your fan is damaged beyond repair.