[ltp] hdparm params for 7k60 drive

Timo Maier linux-thinkpad@linux-thinkpad.org
Wed, 24 Dec 2003 15:39:36 +0100


Hi!

> the same drive in a T23...or is this system bus/processor speed
> related?
>
>  Timing buffer-cache reads:   736 MB in  2.01 seconds = 366.53 MB/sec
>  Timing buffered disk reads:   62 MB in  3.09 seconds =  20.08 MB/sec

Thinkpad T23, 60gig 5400rpm:

/dev/hda:
 Timing buffer-cache reads:   860 MB in  2.01 seconds = 428.57 MB/sec
 Timing buffered disk reads:   60 MB in  3.12 seconds =  19.20 MB/sec

/dev/hda:
 multcount    = 16 (on)
 IO_support   =  3 (32-bit w/sync)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 65535/16/63, sectors = 117210240, start = 0

 Model=IC25T060ATCS05-0, FwRev=CA8OA71A, SerialNo=CSL801D8G1ERJA
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=DualPortCache, BuffSize=1768kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117210240
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
 AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
 Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3:

 * signifies the current active mode

-- 
http://tam.belchenstuermer.de/