[ltp] T42P Xorg 7.0 and fglrx 8.26.18-1 -> unstable and no 3D
Marc MERLIN
linux-thinkpad@linux-thinkpad.org
Fri, 21 Jul 2006 23:52:59 -0400
I got the ATI installer, generated debian/unstable packages, tweaked my
xorg.conf, and in theory I should have DRI working, but
1) I don't
2) the driver sucks, if I go to text mode and come back, the windows are
half displayed. If I suspend and resume, same problem
I did remove radeonfb, and the problems are still there, I even get:
gandalf:~$ glxinfo | grep direct
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect
Yet:
gandalf:~$ dpkg -L fglrx-driver | grep lib
/usr/lib
/usr/lib/libGL.so.1.2
package diverts others to: /usr/lib/fglrx/diversions/libGL.so.1.2
/usr/lib/libfglrx_pp.so.1.0
/usr/lib/xorg
/usr/lib/xorg/modules
/usr/lib/xorg/modules/linux
/usr/lib/xorg/modules/linux/libfglrxdrm.so
/usr/lib/xorg/modules/drivers
/usr/lib/xorg/modules/drivers/fglrx_drv.so
/usr/lib/libfglrx_dm.so.1.0
/usr/lib/dri
/usr/lib/dri/atiogl_a_dri.so
/usr/lib/dri/fglrx_dri.so
/usr/lib/libfglrx_gamma.so.1.0
/usr/lib/libfglrx_gamma.so.1
/usr/lib/libGL.so.1
package diverts others to: /usr/lib/fglrx/diversions/libGL.so.1
and the abbreviated logs below do have:
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
So, why does the driver seem to suck so much, and why is X still going to
Mesa for 3D?
Thanks
Marc
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.12-1-686 i686
Current Operating System: Linux gandalf.merlins.org 2.6.17.6-pmup-desktop-marc1y #1 PREEMPT Thu Jul 20 13:08:42 EDT 2006 i686
Build Date: 16 March 2006
(...)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "GLcore"
(II) Reloading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(...)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.26.18
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.26g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2006 12:50:04
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.26.1-driver-lnx-275228
(--) Assigning device section with no busID to primary device
(--) Chipset MOBILITY FireGL T2/T2e (M10/M11 4E54) found
(...)
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "FSAAEnable" "on"
(**) fglrx(0): Option "PseudoColorVisuals" "on"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "MOBILITY FireGL T2/T2e (M10/M11 4E54)" (Chipset = 0x4e54)
(--) fglrx(0): (PciSubVendor = 0x1014, PciSubDevice = 0x054f)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xc0100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131008 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON 9600
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: GL10
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.26.18
ABI class: X.Org Server Extension, version 0.2
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(...)
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7086000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.26.18
(II) fglrx(0): Date: Jun 22 2006
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.17.6-pmup-desktop-marc1y
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): FIREGL Board Found
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3340
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xd0000000)
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] graphics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0x00008000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): front overlay: 0xe10a7000
(II) fglrx(0): back overlay: 0xe12b4000
(II) fglrx(0): video overlay: 0xe14c1000
(II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x00954000
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,1528)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
(II) fglrx(0): Largest offscreen area available: 1600 x 328
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): Interrupt handler installed at IRQ 11.
(II) fglrx(0): Exposed events to the /proc interface
(==) RandR enabled
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems & security ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/