[ltp] IBM R40 2722-GDG DynamicClocks
Florian Knobloch
linux-thinkpad@linux-thinkpad.org
Tue, 17 Aug 2004 17:59:40 +0200
This is a multi-part message in MIME format.
--------------000606030300010204030604
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Hello all!
I have compiled xorg-x11-6.7.99.2 which includes Alex's Dynamic
Frequency code. (on gentoo)
My notebook includes the ATI Radeon 7500 mobility. ACPI and Powernow
daemon are running.
When I use
Option "DynamicClocks" "true"
in xorg.conf
i get the same results like when not using it in terms of power rate
(about 18W).
cat /proc/acpi/battery/BAT0/state
present: yes
capacity state: ok
charging state: discharging
present rate: 18257 mW <<<<<<<<<<<<<<<<<<<<<<<<<
remaining capacity: 39360 mWh
present voltage: 16072 mV
When I use Windows it is usually around 13000mW (or lower) even though
the displaybrightness is set at the same level which of course results
in longer runtimes.
Also the cpu fan is running in the same mode (every 5 minutes for 40
seconds) -- i hoped using the patch would extend by battery life and
quiten by computer.
What can I also do to enable or extend the code or do other tests?
Any help or suggestion is welcome.
thanks and greets, flo
--------------000606030300010204030604
Content-Type: text/plain;
name="XF86Config"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="XF86Config"
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
# Load "xv"
Load "dbe" # Double buffer extension
Load "extmod"
Load "glx"
Load "record"
Load "type1"
# Load "speedo"
Load "freetype"
Load "dri"
# Load "xtt"
# Load "GLcore"
# Load "v4l"
Load "fbdevhw"
# Load "vnc"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# SubSection "extmod"
# Option "omit xfree86-dga" # don't initialise the DGA extension
# EndSubSection
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "unix/:-1"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/ukr"
FontPath "/usr/share/fonts/"
FontPath "/usr/share/fonts/default/Type1"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/sharefont"
FontPath "/usr/share/fonts/lfp-var"
FontPath "/usr/share/fonts/lfp-fix"
FontPath "/usr/share/fonts/default/ghostscript"
FontPath "/usr/share/fonts/freefont"
FontPath "/usr/share/fonts/artwiz"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
FontPath "/usr/share/fonts/baekmuk"
FontPath "/usr/share/fonts/ttf/korean/baekmuk"
FontPath "/usr/share/fonts/ttf/zh_TW"
FontPath "/usr/share/fonts/ttf/zh_CN"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/jmk"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/afms/adobe"
FontPath "/usr/share/fonts/afms"
FontPath "/usr/share/fonts/default"
FontPath "/usr/share/fonts/latex-xft-fonts"
FontPath "/usr/share/fonts/terminus"
FontPath "/usr/share/fonts/ttf"
FontPath "/usr/share/fonts/ttf/korean"
FontPath "/usr/share/ghostscript/fonts"
FontPath "/usr/share/libwmf/fonts"
FontPath "/usr/share/lyx/xfonts"
FontPath "/usr/share/ogonkify/fonts"
FontPath "/usr/kde/3.2/share/fonts"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
FontPath "/usr/share/fonts"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Option "AllowMouseOpenFail" "True"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
# Set the basic blanking screen saver timeout.
Option "blank time" "0" # 10 minutes
# Set the DPMS timeouts. These are set here because they are global
# rather than screen-specific. These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "250 50"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse0"
Driver "mouse"
# Option "Protocol" "IMPS/2"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
# Mouse-speed setting for PS/2 mouse.
Option "Resolution" "350"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons" "yes"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse2"
Option "Device" "/dev/mouse"
Option "Protocol" "psaux"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "lcd"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 90.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 59.0 - 75.0
# Option "dpms"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "ati"
# BusID "PCI:1:0:0"
# Driver "vesa"
Driver "radeon"
# Option "AGPMode" "4"
# Option "AGPFastWrite" "true"
# Option "EnablePageFlip" "true"
# Option "DDCMode" "yes"
# Option "RenderAccel" "true"
Option "DynamicClocks" "true"
#VideoRam 32768
# Insert Clocks lines here if appropriate
# rfb options
# By default, no password is required.
# The next rfbauth uses the root password for vncserver
# Option "rfbauth" "/root/.vnc/passwd"
# The use one of the next ...shared options ("nevershared" is the default)
# Option "nevershared"
# Option "alwaysshared"
# Option "dontdisconnect"
# To activate the http server
# Option "httpdir" "/usr/share/vnc/classes"
# Option "httpport" "5852"
# For XEvents
# The local user must accept the new connection.
# An X application must be used to send the acceptance back to the server.
# Using the extension library as detailed above.
# Option "useraccept"
# Enable the vnc service on this device, IMPORTANT!!!!!!!!!!!!
# Option "usevnc"
# The options below are new in the 4.3.0 release
# Only listen on the localhost interface
# Option "localhost"
# Listen on a specific interface
# Option "interface" "192.168.0.1"
# View only session
# Option "viewonly"
# The option below is new in the 4.3.0.4 release
# Option "loginauth"
# Option "rfbport" "5952"
EndSection
#Section "InputDevice"
# vncKeyboard: keyboard actions from vnc
# Identifier "vncKeyboard"
# Driver "rfbkeyb"
#EndSection
#Section "InputDevice"
# vncMouse: mouse actions from vnc
# Identifier "vncMouse"
# Driver "rfbmouse"
#EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ati"
Monitor "lcd"
DefaultDepth 24
# Subsection "Display"
# Depth 8
# Modes "1280x1024" "1024x768" "800x600" "640x480"
# ViewPort 0 0
# EndSubsection
Subsection "Display"
Depth 16
Modes "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "320x240"
# ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "320x240"
# ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" "320x240"
# ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Default Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
# InputDevice "Mouse0" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
# InputDevice "vncMouse" "ExtraPointer"
# InputDevice "vncKeyboard" "ExtraKeyboard"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
--------------000606030300010204030604
Content-Type: text/x-log;
name="Xorg.0.log"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline;
filename="Xorg.0.log"
This is a pre-release version of the The X.Org Foundation X11.
Portions of this release are based on XFree86 4.4RC2 and selected
files from XFree86 4.4RC3. It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the The X.Org Foundation "monolithic tree" CVS
repository hosted at http://www.freedesktop.org/Software/xorg/.99
Release Date: 12 August 2004
X Protocol Version 11, Revision 0, Release 6.7.99.2
Build Operating System: Linux 2.6.7 i686 [ELF]=20
Current Operating System: Linux lap 2.6.7 #7 Tue Aug 17 12:53:40 CEST 200=
4 i686
Build Date: 15 August 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 17 16:37:38 2004
(=3D=3D) Using config file: "/etc/X11/XF86Config"
(=3D=3D) ServerLayout "Default Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "lcd"
(**) | |-->Device "ati"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/encodings"=
=2E
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/encodings").
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/sharefont" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/lfp-var" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/lfp-fix" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/jmk" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/libwmf/fonts".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/libwmf/fonts").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/ogonkify/fonts".=
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/ogonkify/fonts").
(**) FontPath set to "/usr/share/fonts/local,/usr/share/fonts/misc,/usr/s=
hare/fonts/75dpi:unscaled,/usr/share/fonts/100dpi:unscaled,/usr/share/fon=
ts/Speedo,/usr/share/fonts/Type1,/usr/share/fonts/util,/usr/share/fonts/c=
yrillic,/usr/share/fonts/TTF,/usr/share/fonts/CID,/usr/share/fonts/ukr,/u=
sr/share/fonts/,/usr/share/fonts/default/Type1,/usr/share/fonts/corefonts=
,/usr/share/fonts/default/ghostscript,/usr/share/fonts/freefont,/usr/shar=
e/fonts/artwiz,/usr/share/fonts/ttf-bitstream-vera,/usr/share/fonts/baekm=
uk,/usr/share/fonts/ttf/korean/baekmuk,/usr/share/fonts/ttf/zh_TW,/usr/sh=
are/fonts/ttf/zh_CN,/usr/share/fonts/cyrillic,/usr/share/fonts/util,/usr/=
share/fonts/afms/adobe,/usr/share/fonts/afms,/usr/share/fonts/default,/us=
r/share/fonts/latex-xft-fonts,/usr/share/fonts/terminus,/usr/share/fonts/=
ttf,/usr/share/fonts/ttf/korean,/usr/share/ghostscript/fonts,/usr/share/l=
yx/xfonts,/usr/kde/3.2/share/fonts,/usr/local/share/fonts,/usr/share/font=
s,/usr/share/fonts"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(=3D=3D) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages =3D 0x03, oldVal1 =3D 0x00000000, mode1Res1 =3D 0x800000=
00
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1014,0529 rev 03 class 06,00,00 hd=
r 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 03 class 06,04,00 hd=
r 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1014,052d rev 01 class 0c,03,00 hd=
r 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1014,052d rev 01 class 0c,03,00 hd=
r 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1014,052d rev 01 class 0c,03,00 hd=
r 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1014,052e rev 01 class 0c,03,20 hd=
r 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 81 class 06,04,00 hd=
r 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 01 class 06,01,00 hd=
r 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1014,052d rev 01 class 01,01,8a hd=
r 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1014,052d rev 01 class 0c,05,00 hd=
r 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1014,0523 rev 01 class 04,01,00 hd=
r 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1014,0524 rev 01 class 07,03,00 hd=
r 00
(II) PCI: 01:00:0: chip 1002,4c57 card 1014,0527 rev 00 class 03,00,00 hd=
r 00
(II) PCI: 02:00:0: chip 104c,ac56 card 0000,0000 rev 00 class 06,07,00 hd=
r 02
(II) PCI: 02:02:0: chip 168c,0012 card 17ab,8310 rev 01 class 02,00,00 hd=
r 00
(II) PCI: 02:07:0: chip 104c,8026 card 1014,0515 rev 00 class 0c,00,10 hd=
r 00
(II) PCI: 02:08:0: chip 8086,103d card 1014,0522 rev 81 class 02,00,00 hd=
r 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,5), BCTRL: 0x0004 (VGA_EN is clea=
red)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
[4] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[5] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]
[6] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]
[7] -1 0 0x00005c00 - 0x00005cff (0x100) IX[B]
[8] -1 0 0x00006000 - 0x000060ff (0x100) IX[B]
[9] -1 0 0x00006400 - 0x000064ff (0x100) IX[B]
[10] -1 0 0x00006800 - 0x000068ff (0x100) IX[B]
[11] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B]
[12] -1 0 0x00007000 - 0x000070ff (0x100) IX[B]
[13] -1 0 0x00007400 - 0x000074ff (0x100) IX[B]
[14] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[15] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B]
[16] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
[17] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]
[18] -1 0 0x00008800 - 0x000088ff (0x100) IX[B]
[19] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xc0200000 - 0xcfffffff (0xfe00000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is s=
et)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:0:0), (2,3,6), BCTRL: 0x03c0 (VGA_EN is clear=
ed)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobi=
lity 7500] rev 0, Mem @ 0xe0000000/27, 0xc0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0x=
cfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xc0214000 - 0xc0214fff (0x1000) MX[B]
[1] -1 0 0xc0210000 - 0xc0213fff (0x4000) MX[B]
[2] -1 0 0xc0215000 - 0xc02157ff (0x800) MX[B]
[3] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[4] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[5] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[6] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[7] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[12] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[14] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[17] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[20] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xc0214000 - 0xc0214fff (0x1000) MX[B]
[1] -1 0 0xc0210000 - 0xc0213fff (0x4000) MX[B]
[2] -1 0 0xc0215000 - 0xc02157ff (0x800) MX[B]
[3] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[4] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[5] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[6] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[7] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[12] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[13] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[14] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[17] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[20] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0214000 - 0xc0214fff (0x1000) MX[B]
[6] -1 0 0xc0210000 - 0xc0213fff (0x4000) MX[B]
[7] -1 0 0xc0215000 - 0xc02157ff (0x800) MX[B]
[8] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[9] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[10] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[11] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[12] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[14] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[19] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[23] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[24] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor=3D"X.Org Foundation & the After X-TT Project=
"
compiled for 6.7.99.2, module version =3D 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 0.0.2
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility M7 LW (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0214000 - 0xc0214fff (0x1000) MX[B]
[6] -1 0 0xc0210000 - 0xc0213fff (0x4000) MX[B]
[7] -1 0 0xc0215000 - 0xc02157ff (0x800) MX[B]
[8] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[9] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[10] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[11] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[12] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[14] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[19] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[22] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[23] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[24] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0214000 - 0xc0214fff (0x1000) MX[B]
[6] -1 0 0xc0210000 - 0xc0213fff (0x4000) MX[B]
[7] -1 0 0xc0215000 - 0xc02157ff (0x800) MX[B]
[8] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[9] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[10] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[11] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[12] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[14] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[22] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[23] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[24] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[25] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[26] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[27] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[28] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[29] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[30] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[31] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xc0100000
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is =
0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth =3D 24 bits stored in 4 bytes (32 bpp pixmaps=
)
(=3D=3D) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "DynamicClocks" "true"
(=3D=3D) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID =3D 0x=
4c57)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(--) RADEON(0): VideoRAM: 32768 kByte (64 bit DDR SDRAM)
(II) RADEON(0): AGP card detected
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorT=
ype-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):=20
(II) RADEON(0): Primary:
Monitor -- LVDS
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- None
DAC Type -- Unknown
TMDS Type -- NONE
DDC Type -- NONE
(II) RADEON(0): PLL parameters: rf=3D2700 rd=3D12 min=3D12000 max=3D35000=
; xclk=3D18300
(II) RADEON(0): Panel ID string: Samsung LTN150P1-L02 =20
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode d=
isabled
(=3D=3D) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1400x1050
(II) RADEON(0): Valid mode using on-chip RMX: 1280x1024
(II) RADEON(0): Valid mode using on-chip RMX: 1280x960
(II) RADEON(0): Valid mode using on-chip RMX: 1152x864
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Valid mode using on-chip RMX: 640x480
(II) RADEON(0): Valid mode using on-chip RMX: 320x240
(II) RADEON(0): Total number of valid FP mode(s) found: 8
(--) RADEON(0): Virtual size is 1400x1050 (pitch 1408)
(**) RADEON(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 =
kHz, 60.2 Hz
(II) RADEON(0): Modeline "1400x1050" 108.00 1400 34208 34320 1688 1050=
1050 1053 1063
(**) RADEON(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 =
kHz, 60.2 Hz
(II) RADEON(0): Modeline "1280x1024" 108.00 1280 34208 34320 1688 1024=
1050 1053 1063
(**) RADEON(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 64.0 k=
Hz, 60.2 Hz
(II) RADEON(0): Modeline "1280x960" 108.00 1280 34208 34320 1688 960 1=
050 1053 1063
(**) RADEON(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 k=
Hz, 60.2 Hz
(II) RADEON(0): Modeline "1152x864" 108.00 1152 34208 34320 1688 864 1=
050 1053 1063
(**) RADEON(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 k=
Hz, 60.2 Hz
(II) RADEON(0): Modeline "1024x768" 108.00 1024 34208 34320 1688 768 1=
050 1053 1063
(**) RADEON(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kH=
z, 60.2 Hz
(II) RADEON(0): Modeline "800x600" 108.00 800 34208 34320 1688 600 105=
0 1053 1063
(**) RADEON(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kH=
z, 60.2 Hz
(II) RADEON(0): Modeline "640x480" 108.00 640 34208 34320 1688 480 105=
0 1053 1063
(**) RADEON(0): *Mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kH=
z, 60.2 Hz
(II) RADEON(0): Modeline "320x240" 108.00 320 34208 34320 1688 240 105=
0 1053 1063
(**) RADEON(0): Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz),=
64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "640x350" 108.00 640 34208 34320 1688 350 105=
0 1053 1063
(**) RADEON(0): Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz),=
64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "640x400" 108.00 640 34208 34320 1688 400 105=
0 1053 1063
(**) RADEON(0): Default mode "720x400": 108.0 MHz (scaled from 0.0 MHz),=
64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "720x400" 108.00 720 34208 34320 1688 400 105=
0 1053 1063
(**) RADEON(0): Default mode "832x624": 108.0 MHz (scaled from 0.0 MHz),=
64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "832x624" 108.00 832 34208 34320 1688 624 105=
0 1053 1063
(**) RADEON(0): Default mode "1152x768": 108.0 MHz (scaled from 0.0 MHz)=
, 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1152x768" 108.00 1152 34208 34320 1688 768 1=
050 1053 1063
(=3D=3D) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor=3D"X.Org Foundation"
compiled for 6.7.99.2, module version =3D 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xc0100000 - 0xc010ffff (0x10000) MX[B]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xc0214000 - 0xc0214fff (0x1000) MX[B]
[8] -1 0 0xc0210000 - 0xc0213fff (0x4000) MX[B]
[9] -1 0 0xc0215000 - 0xc02157ff (0x800) MX[B]
[10] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[11] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[12] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[13] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[14] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[15] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[16] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[17] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[21] 0 0 0x00003000 - 0x000030ff (0x100) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[25] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[26] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[27] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[28] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[29] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[30] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[33] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[34] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(=3D=3D) RADEON(0): Write-combining range (0xe0000000,0x2000000)
(II) RADEON(0): Dynamic Clock Scaling Enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"=
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xe1a9f000
(II) RADEON(0): [drm] mapped SAREA 0xe1a9f000 to 0x4234d000
(II) RADEON(0): [drm] framebuffer handle =3D 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000201 [AGP 0x8086/0x3340; Card 0x1002/0x4=
c57]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle =3D 0xd0000000
(II) RADEON(0): [agp] Ring mapped at 0x4234f000
(II) RADEON(0): [agp] ring read ptr handle =3D 0xd0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0x42450000
(II) RADEON(0): [agp] vertex/indirect buffers handle =3D 0xd0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x42451000
(II) RADEON(0): [agp] GART texture map handle =3D 0xd0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0x42651000
(II) RADEON(0): [drm] register handle =3D 0xc0100000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,5957)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 4905
(II) RADEON(0): Will use back buffer at offset 0xb70000
(II) RADEON(0): Will use depth buffer at offset 0x1114000
(II) RADEON(0): Will use 9472 kb for textures at offset 0x16c0000
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
15 512x512 slots
(II) RADEON(0): Acceleration enabled
(=3D=3D) RADEON(0): Backing store disabled
(=3D=3D) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 4902
(II) RADEON(0): X context handle =3D 0x00000001
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(=3D=3D) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1=20
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "250 50"
(**) Option "XkbRules" "xfree86"
(**) Keyboard1: XkbRules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard1: XkbLayout: "de"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local, removing from li=
st!
Could not init font path element /usr/share/fonts/Speedo, removing from l=
ist!
Could not init font path element /usr/share/fonts/util, removing from lis=
t!
Could not init font path element /usr/share/fonts/CID, removing from list=
!
Could not init font path element /usr/share/fonts/, removing from list!
Could not init font path element /usr/share/fonts/default/ghostscript, re=
moving from list!
Could not init font path element /usr/share/fonts/util, removing from lis=
t!
Could not init font path element /usr/share/fonts/afms/adobe, removing fr=
om list!
Could not init font path element /usr/share/fonts/afms, removing from lis=
t!
Could not init font path element /usr/share/fonts/default, removing from =
list!
Could not init font path element /usr/share/fonts/ttf, removing from list=
!
Could not init font path element /usr/share/fonts/ttf/korean, removing fr=
om list!
Could not init font path element /usr/local/share/fonts, removing from li=
st!
Could not init font path element /usr/share/fonts, removing from list!
Could not init font path element /usr/share/fonts, removing from list!
SetClientVersion: 0 8
--------------000606030300010204030604--